TPI M400 floor leveling cement

What is TPI M400 self-leveling cement? How to use it? (Complete in one place)

TPI M400 self-leveling mortar is Ready-mixed mortar for concrete floor leveling Helps to quickly create a smooth and even floor. Ideal for preparing the floor before laying various materials such as tiles, laminate, or parquet, making the next step of laying the floor easy and beautiful.

A quick summary of the TPI M400

• What is it used for?: Pour the concrete floor to level it.
• How thick can you pour it?: From 3 to 5 centimeters
• How many square meters can 1 bag cover?: At a thickness of 3 cm, it can be poured to cover approximately 0.93 sq m.
• What kind of work is it suitable for?: Prepare the floor before laying tiles, laminate, parquet or polishing.

Outstanding features of TPI M400 self-leveling cement

• Easy to use: It is ready-mixed cement. Just mix with water and it is ready to use. No need to add sand or stones.
• Flows well: Contains special chemicals that help the cement adjust its own level, making work easier and faster.
• Good resistance to impact: Can be poured to adjust the original concrete floor level to the desired level.
• Smooth facial skin: The surface can be smoothed by rough grinding or by sprinkling cement powder to polish it.

What can TPI M400 be used for?

TPI M400 self-leveling mortar is designed for the following main tasks:

• Pour and level the concrete floor Uneven, sunken, or unevenly sloped
• Prepare the surface before laying the covering material. All types such as
  • Cladding workrubber tiles
  • crabSPC flooring boxes
  • Laminate flooring work
  • Parquet flooring
  • Ceramic tile laying work
• Pour the top coat over the floor to polish it. Strengthen facial skin

How to use TPI M400 leveling mortar

To get the best results, follow these steps:

1. Surface preparation::
   • Clean the surface to be free from dust, oil stains, paint, and dirt.
   • If the surface has any loose or frayed parts, they must be removed first.
   • Moisten the surface with a moderate amount of water to prevent the floor from absorbing water from the cement too quickly.
2. Mixing:
   • Mix 1 bag (50 kg) of TPI M400 cement with approximately 7-8 liters of clean water.
   • Use a cement mixer (electric drill with a propeller) to mix until it is a uniform texture and does not form lumps.
   • Leave for about 1-2 minutes and then stir again before using.
3. Pouring and leveling:
   • Pour cement onto the prepared area.
   • Use a trowel or triangular spatula to level the surface to the desired thickness (3-5 cm).
   • Can be used together with a mortar sprayer (Mortar Machine) for speed in large areas.
4. curing:
   • After the cement begins to harden, it should be cured with water (sprinkled with water) for at least 2-3 days.
   • The surface should be protected from direct sunlight or strong wind to prevent cracking from the cement drying too quickly.

How many square meters can be covered with 1 bag of TPI M400 (50 kg)?

The amount of cement used per bag will depend on the thickness of the pour as follows:

Key components

• cement: Portland cement, Type 1, TPI brand (according to TIS 15 standards)

• finely ground stone: Dried and sorted to ensure consistent quality.

• Quality enhancing chemicals: It has special properties that help with flow and increase adhesion.