Lightweight block masonry mortar (Quick Coat)

Lightweight block masonry mortar (Quick Coat) Weight 40 kg./bag. It is a dry type of cement. No need to pour water on the bricks before laying. Suitable for use with lightweight concrete walls in particular.

Properties of Kangaroo lightweight brick mortar

• Highest quality for wall constructionLightweight concrete blocks
• Dry type, fast, reduces steps, no need to pour water on the bricks before laying.
• It has special properties of high adhesion, adhesion firmly in 10 seconds.
• It is tough and can withstand force quickly, does not crumble, and has time to prepare the construction line before it hardens.
• Fine cement texture, easy to align, thin construction, no waste of cement
• For building lightweight brick walls that do not bear loads (Non-Load Bearing) and lightweight brick walls that bear loads (Load Bearing) with a construction thickness of only 2 – 3 mm.
• Used for interior and exterior wall construction.

Usage area (sq m/bag)

• Lightweight bricks, 7.5 cm thick, can cover 26 sq m.
• Lightweight bricks, 10 cm thick, can cover 19.5 sq m.

Precautions

After mixing with water, it should be used within 1 hour. *Contains cement. May cause irritation if it comes into contact with skin or eyes. *If it gets into eyes and irritation occurs, rinse with clean water. If allergic reactions occur, see a doctor immediately.

Preservation

Should be stored in a shady place, away from moisture. Storage life is 3 months.

advice

• If the mortar is too thin, the comb lines will not stay in place when the brick is knocked against the ground. This can be fixed by adding more mixed mortar. *If the mortar is too thick, the comb lines will break when the trowel is used. This can be fixed by adding more mixed water.
• Proper use and mixing of cement can greatly reduce the problem of cracks.