Lightweight brick plaster, Tiger Mortar

What is Tiger Mortar lightweight concrete block plaster?

Tiger lightweight brick plaster (Tiger Plastering Mortar for Lightweight Block) Manufactured by [Company Name/Group Name]. SCG It is a ready-mixed cement that has been formulated specifically for wall plastering. Lightweight concrete blocks In particular, because lightweight concrete blocks are highly porous and absorb water quickly, this Tiger brand plaster has a high-quality "water-retaining agent" added to it. This helps retain moisture in the plaster, allowing it to set perfectly. A definitive solution for cracking lightweight walls. Providing a smooth and beautiful surface finish, meeting SCG standards.

Why choose Tiger Lightweight Concrete Plaster? (Key Features)

• Excellent water retention, prevents wall cracks: Special chemicals help slow down water loss in the mortar, preventing the lightweight bricks from absorbing water too quickly, thus preventing the mortar from shrinking and cracking.
• Fine-grained mortar, smooth application: The sand used has been carefully sized and dried, resulting in a smooth and fine mortar texture that is easy for plasterers to work with, glides smoothly, and requires less effort.
• Gripping firmly: It contains adhesive additives that help the mortar adhere firmly to the lightweight blocks, preventing peeling and flaking over the long term.
• Save time, no need to mix sand: It's a ready-mixed formula; simply tear open the bag and mix with clean water, and you're ready to start plastering immediately.
• For ultimate strength: Recommended for use with... Tiger lightweight brick mortar To ensure the lightweight wall system has maximum adhesion and crack prevention performance.

Technical data for Tiger Mortar lightweight brick plaster.

How to use Tiger Mortar plaster to create a smooth, crack-free wall.

1. Prepare the wall surface: Dust and clean the lightweight brick walls thoroughly. Caution: Do not overwater the lightweight brick wall. It is recommended to use a brush to shake off excess water or to lightly mist the area with water.
2. Mixing plaster: lead Tiger lightweight brick plaster Mix 1 bag with 11-12 liters of clean water. Use a drill with a propeller attachment or a shovel to stir until smooth. Let it stand for about 5 minutes, then stir again before use.
3. Plastering and stuccoing: Use a putty knife or trowel to apply plaster to the wall to a thickness of approximately 1-1.5 cm. Then, use a trowel to smooth the surface.
4. Spinning the face and splashing the water: Leave it for a while to allow the plaster to dry slightly. Gently dab (or splash) a damp sponge onto the wall, then use a wooden trowel to smooth the surface evenly.
5. Wall curing: After the wall has completely dried (approximately 24 hours), it should be continuously sprayed with water for 3-7 days to ensure the plaster structure is as strong and durable as possible.