TPI M210 lightweight brick plaster

What is TPI M210 lightweight concrete block plaster?

TPI M210 lightweight brick plaster (TPI M210 Mortar) Manufactured by... TPI Polene Public Company Limited It is a ready-mixed plaster that has been formulated and developed specifically for use on walls. Lightweight concrete blocks Specifically, because lightweight concrete blocks have the property of absorbing water quickly, TPI M210 contains added water-retaining agents and adhesion enhancers. This helps to make the mortar more cohesive, smooth to apply, and dry within the appropriate time. Most importantly, “"Effectively prevents hairline cracks and fissures on walls."”

Why choose TPI M210 lightweight plaster? (Key features)

• Excellent water absorption: It prevents lightweight concrete blocks from absorbing water from the mortar too quickly, allowing the mortar to set completely and reducing wall cracking problems.
• High adhesion: The mortar bonds tightly to the lightweight concrete block surface, preventing peeling, cracking, or blistering over the long term.
• Smooth application, easy to work with. Achieve an exceptionally smooth wall surface, reducing the need for plastering and finishing by the craftsman, saving time and labor costs.
• Ready-mixed formulas: No need for the hassle of sifting and mixing sand yourself. Just add clean water in the correct proportions and it's ready for plastering immediately.
• Working together as a system: For optimal performance of lightweight walls, it is recommended to construct the walls using... TPI M310 lightweight brick mortar In conjunction with coating with TPI M210.

Technical data for TPI M210 lightweight brick plaster.

How to use TPI M210 plaster to achieve a perfectly smooth finish on lightweight concrete walls.

1. Prepare the surface: Clean the lightweight brick wall to remove dust, oil stains, or any other debris. Caution: For lightweight concrete blocks, it's not necessary to water them as thoroughly as with clay bricks. It's recommended to use a brush to lightly mist or sprinkle water on them.
2. Mixing plaster: lead TPI M210 lightweight brick plaster Mix 1 bag (50 kg) with 11-12 liters of clean water. Use a drill with a mixing blade to stir the cement until smooth. Let it sit for a while to allow the chemicals to cure, then stir again.
3. Plastering and stuccoing: Use a trowel or plastering trowel to apply plaster to the lightweight brick wall to a thickness of approximately 1-1.5 centimeters. (If you need a thickness thicker than 1.5 cm, apply it in two layers, waiting for the first layer to dry before applying the second.)
4. Scraping and aerating the water: Use a trowel to level the wall. Let the plaster dry slightly, then use a damp sponge to wipe the surface of the wall, and then use a wooden trowel to smooth the surface.
5. Wall curing: After the wall has completely dried, it should be continuously moistened with water for approximately 3-7 days to ensure maximum strength and durability of the plaster structure.