TPI M200 ready-mixed plaster

What is TPI M200 ready-mixed plaster?

TPI M200 ready-mixed plaster (TPI M200 Mortar) is a high-quality ready-mixed mortar from... TPI Polene Public Company Limited Designed specifically for general wall plastering work, such as walls. Red brick or Concrete Block The mortar is made from a mixture of cement, specially graded sand, and chemical additives that improve its quality, resulting in a smooth, easy-to-apply mixture that produces a smooth and beautiful wall finish. “"No need to add sand or building admixture."” Simply mix with clean water and it's ready to use immediately.

Key features of TPI M200 ready-mixed plaster.

• Convenient and fast: Save time sifting sand and mixing cement on-site. Simply tear open the bag, add water, and it's ready to use.
• Extra smooth walls: The use of carefully graded sand results in a fine, smooth wall surface, free from rough, grainy textures.
• Reduce cracking problems: It contains water-retaining chemicals that help reduce plaster shrinkage and prevent hairline cracks on walls.
• Easy to work with, sticky and slippery: The mortar adheres well and does not fall off during application, helping to reduce material waste.
• Budget is under control: It provides more accurate quantity calculations than traditional mortar mixing, making it ideal for projects requiring cost control.

Technical data for TPI M200 ready-mixed plaster.

How to use TPI M200 plaster to create a smooth, crack-free wall.

1. Prepare the surface: Clean the brick wall to remove any dust, oil stains, or debris. Importantly, water the brick wall until it is sufficiently damp. Before plastering, apply a sealant to prevent the bricks from absorbing water from the mortar (the main cause of hairline cracks).
2. Mixing plaster: mix TPI M200 ready-mixed plaster Mix 1 bag (50 kg) with 11-12 liters of clean water. Use a drill with a mixing blade or a shovel to mix thoroughly until the cement is smooth and uniform. Let it stand for about 5 minutes, then stir again.
3. Plastering and stuccoing: Use a trowel or plastering trowel to apply plaster to the wall to the desired thickness (a thickness of approximately 1-1.5 centimeters is recommended).
4. Scraping and aerating the water: Use a trowel to smooth the surface. Let the plaster dry slightly, then use a damp sponge to apply water to the wall (beat the water in) while using a wooden trowel to smooth the surface.
5. Wall curing: After the plastering is complete and the mortar has set, the wall should be cured by spraying water for at least 3-7 days to ensure maximum wall strength.