Red Plumb Line Mortar: Lightweight Block Plaster Mortar for Plastering Lightweight Blocks. Weight: 40 kg/bag. For plastering lightweight block walls. Suitable for both interior and exterior applications.
Lightweight block plastering mortar (Quick Coat)
Back to products
WeberTile Flex is a high-quality, single-component, flexible cement tile adhesive suitable for ceramic, granito, marble, granite, and artificial stone tiles.
Webertai Flex
Weber Tile Cement Adhesive for Tiling on Cement Floors and Walls
Click to enlarge

Webertai Cem

(1 Reviews)

* Prices may vary depending on quantity and delivery distance. Please inquire with the admin for an accurate price estimate.

Webertai Cem is a single component tile adhesive for laying tiles on floors and cement walls. We sell at project prices, only for contractors and project work.

Contact us via Line to check shipping costs or request project pricing immediately 👇

Contact via LINE

Weber Tile Cement Adhesive

Weber Tile Cem is a single component tile adhesive that is easy to use. Just mix with water. It contains cement, specially selected sand, and special chemicals. It is sticky and has high adhesion strength for laying tiles on cement floors and walls.

Suitable for: Ceramic tiles, terracotta tiles, granite tiles, sizes up to 60x60 cm.

Size: 20 kg. per bag and 25 kg. per bag.

color: grey

Usage volume: 

  • Average 4 sq m per 20 kg bag.
  • Average 5 sq m per 25 kg bag.

 

How to use

Surface preparation:

  • The surface must be smooth, hard, level, clean, dry and have normal water absorption.
  • If the surface is very porous (high water absorption), it is necessary to wet and saturate the surface with water before laying the tiles.
  • If the surface is a plastered wall or newly leveled cement: the standard curing time (i.e. 7 days per 1 cm. thickness) should be used before laying tiles.

Mixing

Mix Weberlei Cem cement glue with water at a ratio of 1:3 by volume (1 part water, 3 parts cement glue). Use a low-speed blender to blend until smooth, or divide and mix a little at a time and stir thoroughly until the glue does not clump. Leave for 3-4 minutes before use.

Tiling

  1. Use a notched trowel to spread the cement glue onto the surface.
  2. If the tile is larger than 10x10 inches, spread a thin layer of cement glue over the back of the tile.
  3. Lay the tiles on the cement glue and tap them all over with a rubber hammer.
  4. Wipe away any excess cement glue that has spilled out of the grout lines and that has stained the surface of the tiles.
  5. Customize your tiles in 10 minutes
  6. Leave for 24 hours before grouting.

 

Shelf life and storage

1 year from the date of manufacture, in unopened condition and stored in a cool, dry, ventilated place. 

(If you don't use up all the bag, you must tie the bag tightly.)

typeStandard cement glue
density1.40 g/cm2.
Chemical curing period3-4 minutes
Shelf life after mixing (store in a shady place)4 hours
The time taken between applying cement glue and laying tiles20 minutes
Thickness of cement glue spread on the surface2-10 mm.
Before grouting the tile joints, allow the cement glue to dry for at least24 hours

note : These test results are obtained from sample laboratories and may differ from the results obtained from Mixing at different agencies due to different usage methods and agency conditions.

See other types of cement products >>

 

Contact a sales representative:

LINE ID: @aycon
Tel: 083-0243351

Request for quotation

Via LINE OA
5
1 review
1
0
0
0
0

1 review for เวเบอร์ไทล์ เซ็ม

Clear filters

  1. sweet –

    Good, fast delivery.

Add a review

Your email address will not be published. Required fields are marked *

Other interesting products

TPI M402 Dry Mix Concrete is a ready-mixed dry concrete with a standard compressive strength of 240 KSC (cylinder shape). It's the most cost-effective choice for general floor pouring, laundry areas, walkways around the house, and for casting reinforced concrete columns and lintels. Convenient and fast – simply tear open the bag, add water, and pour immediately. Ideal for extensions and renovations where concrete mixer trucks cannot access. Order project-priced construction materials at AY Contento.

Dry Concrete TPI M402

TPI M403 dry mix concrete is a popular ready-mixed concrete product with a high standard compressive strength of up to 280 KSC (cylinder). Designed specifically for paving roads, parking lots, factory floors, and lintels, it's convenient to use – simply add water; no cement mixer truck required. It's easy to control costs and provides consistent quality in every bag. Order project pricing or wholesale rates at AY Contento.

Dry concrete TPI M403

Joey Lightweight Concrete Block Mortar, 40 kg/bag. This is a dry-mix mortar that does not require wetting the bricks before laying. It is specifically designed for use with lightweight concrete block walls.

Lightweight block masonry mortar (Quick Coat)

Crocodile Red Tile Adhesive is a tile adhesive suitable for swimming pool tiles and large tiles. It can be used for both floor and wall tiles, both indoors and outdoors.

Red Crocodile Tile Adhesive

TPI M400 leveling mortar is a ready-mixed mortar for leveling concrete floors to achieve a smooth and even surface. It flows well, is easy to pour and spread, and reduces shrinkage and cracking. It's an essential tool for preparing surfaces before installing finishing materials such as SPC vinyl tiles, laminate flooring, or ceramic tiles. Easy to use – simply mix with water. Project pricing available from AY Contento.

TPI M400 floor leveling cement